EasyManuals Logo

Canon imagePROGRAF iPF755 User Manual

Canon imagePROGRAF iPF755
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #741 background imageLoading...
Page #741 background image
Setting Item Description, Instructions
Inter-
face
Setup
Ether-
net
Driver
Auto Detect Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are supported
over the LAN.
MAC Address Indicates the MAC address.
Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the
default values.
System
Setup
Sleep Timer Specify the period before the printer enters sleep
mode.
Buzzer Choose On for the buzzer to sound in case of errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date &
Time
Date Set the current date.
Time Set the current time. Available only if the Date set-
ting is specified.
Date Format Specify the date format.
Language Specify the language used on the Display Screen.
Time Zone Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Length Unit Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Detect Mismatch Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing paused under these
circumstances. Choose Warning to continue printing
after notification. Choose None to continue printing
without notification. Choose Hold Job to store jobs
with mismatched types and sizes of paper on the
printer hard disk, in a print queue awaiting process-
ing. (See "Using the Printer Hard Disk.")
→P.566
Paper
Size
Basis
Roll Selection 1 If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll
of an intermediate width is detected.
Roll Selection 2 If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied when
a roll of an intermediate width is detected.
Printer Parts
>
Control Panel
>
iPF755 Menu Settings
9
725

Table of Contents

Other manuals for Canon imagePROGRAF iPF755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF755 and is the answer not in the manual?

Canon imagePROGRAF iPF755 Specifications

General IconGeneral
Printer TypeLarge Format Printer
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
Number of Nozzles15, 360
Memory (Standard)256 MB
Hard Drive80 GB
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Print TechnologyInkjet
Ink TypePigment/Dye
Maximum Print Width36 inches
ConnectivityUSB, Ethernet
Media HandlingRoll Feed
Media Width8 inches to 36 inches
Media Thickness0.07 - 0.8mm
Ink ColorsCyan, Magenta, Yellow, Black
Media SizesRoll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media TypesPlain Paper, Coated Paper, Photo Paper
Power Consumption140W or less
Print Speed (Color)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds

Related product manuals