EasyManuals Logo

Canon imagePROGRAF iPF755 User Manual

Canon imagePROGRAF iPF755
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #868 background imageLoading...
Page #868 background image
HP-GL/2 jobs are printed in monochrome (or color)
Cause Corrective Action
The Color Mode setting in
the Control Panel menu is in-
correct.
Check the Color Mode setting in the Control Panel menu.
(See "Menu Settings.") →P.716
However, for optimal Printhead performance, the printer consumes trace amounts of
color ink even when Monochrome is selected as Color Mode.
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause Corrective Action
AdjustFaintLines is On in the
Control Panel menu.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the
expected results. However, lines in some colors may appear broken.
HP-GL/2 jobs are printed 6 mm larger than specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.
In the Control Panel menu, set PageSizeProcess1 to On.
(See "Menu Settings.") →P.716
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as
created in the source application, is incor-
rect.
In the Control Panel menu, set PageSizeProcess2 or Conserve Paper
to On.
The layout will be changed to the optimal layout.
(See "Menu Settings.") →P.716
HP-GL/2 printing takes a long time
Cause Corrective Action
Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi
and print again.
(See "Menu Settings.") →P.716
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
Corrective Action
The printer is analyzing the print job. Please wait a while until printing is finished.
Troubleshooting
>
HP-GL/2 problems
>
HP-GL/2 jobs are printed in monochrome (or color) iPF755
12
852

Table of Contents

Other manuals for Canon imagePROGRAF iPF755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF755 and is the answer not in the manual?

Canon imagePROGRAF iPF755 Specifications

General IconGeneral
Printer TypeLarge Format Printer
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
Number of Nozzles15, 360
Memory (Standard)256 MB
Hard Drive80 GB
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Print TechnologyInkjet
Ink TypePigment/Dye
Maximum Print Width36 inches
ConnectivityUSB, Ethernet
Media HandlingRoll Feed
Media Width8 inches to 36 inches
Media Thickness0.07 - 0.8mm
Ink ColorsCyan, Magenta, Yellow, Black
Media SizesRoll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media TypesPlain Paper, Coated Paper, Photo Paper
Power Consumption140W or less
Print Speed (Color)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds

Related product manuals