EasyManuals Logo

Canon imagePROGRAF iPF755 User Manual

Canon imagePROGRAF iPF755
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #858 background imageLoading...
Page #858 background image
Cause Corrective Action
Color may change slightly even on the same mod-
el of printer if you use a different version of the
firmware or printer driver, or when you print un-
der different settings or in a different printing en-
vironment.
Follow these steps to prepare the printing environment.
1. Use the same version of firmware or printer driver.
2. Specify the same value for all settings items.
Banding in different colors occurs
Cause Corrective Action
The paper feed amount is out of ad-
justment.
Adjust the feed amount.
(See "Adjusting the Feed Amount.") →P.673
Printing does not proceed smoothly
because print jobs are interrupted dur-
ing transmission.
Exit other applications and cancel other print jobs.
In the Control Panel menu, Adj. Pri-
ority is set to Print Length.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjust-
ing the feed amount may improve results.
(See "Adjusting the Feed Amount.") →P.673
The Printhead is out of alignment. Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi.
Adj.).") →P.665
The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.") →P.795
Streaks may occur if you set the Print
Quality too low.
Choose a higher level of Print Quality in the Advanced Settings of the print-
er driver and try printing again.
Printing in Draft or Standard mode is faster and consumes less ink than in
Highest or High modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Print-
ing.") →P.54
The type of paper specified in the
printer driver does not match the type
loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.630
(See "Loading Sheets in the Printer.") →P.652
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Colors in printed images are uneven
Cause
Corrective Action
Line Drawing/Text is selected
when printing images in many solid
colors.
In Print Priority in the Advanced Settings of the printer driver, choose Im-
age.
Troubleshooting
>
Problems with the printing quality
>
Banding in different colors occurs iPF755
12
842

Table of Contents

Other manuals for Canon imagePROGRAF iPF755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF755 and is the answer not in the manual?

Canon imagePROGRAF iPF755 Specifications

General IconGeneral
Printer TypeLarge Format Printer
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
Number of Nozzles15, 360
Memory (Standard)256 MB
Hard Drive80 GB
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Print TechnologyInkjet
Ink TypePigment/Dye
Maximum Print Width36 inches
ConnectivityUSB, Ethernet
Media HandlingRoll Feed
Media Width8 inches to 36 inches
Media Thickness0.07 - 0.8mm
Ink ColorsCyan, Magenta, Yellow, Black
Media SizesRoll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media TypesPlain Paper, Coated Paper, Photo Paper
Power Consumption140W or less
Print Speed (Color)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds

Related product manuals