Canon imagePROGRAF iPF755 User Manual

Messages regarding ink
Ink insufficient. ................................................................................................................................................. 873
No ink left. ....................................................................................................................................................... 873
Remaining level of the ink cannot be correctly detected. ................................................................................ 873
Unable to detect ink level correctly. ................................................................................................................. 874
Close Ink Tank Cover ...................................................................................................................................... 874
Ink tank is empty. ............................................................................................................................................ 874
Not much ink is left. ......................................................................................................................................... 874
No ink tank loaded. .......................................................................................................................................... 875
Wrong ink tank. ............................................................................................................................................... 875
Do not pull out ink tank. ................................................................................................................................... 875
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead,
or do other operations that require ink.
Press ▲ or ▼ to select Rep. Ink Tank, and then
press the OK button. Replace the Ink Tank that is
low with a new Ink Tank.
(See "Replacing Ink Tanks.") →P.787
Press ▲ or ▼ to select Continue to print, and then
press the OK button to resume printing. However,
note that this error may affect the printing quality.
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.") →P.787
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.") →P.856
Error Message > Messages regarding ink >
iPF755 Ink insufficient.
13
873

Canon imagePROGRAF iPF755 Specifications

General

Printer Type	Large Format Printer
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Number of Nozzles	15, 360
Memory (Standard)	256 MB
Hard Drive	80 GB
Ink Droplet Size	4 picoliters
Operating Systems	Windows, Mac OS
Print Technology	Inkjet
Ink Type	Pigment/Dye
Maximum Print Width	36 inches
Connectivity	USB, Ethernet
Media Handling	Roll Feed
Media Width	8 inches to 36 inches
Media Thickness	0.07 - 0.8mm
Ink Colors	Cyan, Magenta, Yellow, Black
Media Sizes	Roll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media Types	Plain Paper, Coated Paper, Photo Paper
Power Consumption	140W or less
Print Speed (Color)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)	D-sized print (33.1 x 23.4 inches) in approximately 28 seconds