EasyManuals Logo

Canon imagePROGRAF iPF755 User Manual

Canon imagePROGRAF iPF755
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #743 background imageLoading...
Page #743 background image
Setting Item Description, Instructions
System
Setup
Erase
HDD
Data
High Speed Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.") →P.744
Secure High Spd. Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.744
Secure Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed
to check if the data was correctly written. (See
"Erasing Data on the Printer's Hard Disk.")
→P.744
Output
Meth-
od
Print Select the printing method for jobs received from
software other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
Print (Auto Del)
Save: Box 01
Print After Recv A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Save: Shared Box Select Off to print without saving jobs in the box
shared among multiple users.
Show Job Log Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Prep.MovePrinter Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.") →P.816
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Ad-
min.
Menu
Change Password By setting a password, you can restrict menu display
and configuration as follows. You can input between
0 and 9999999.
• Viewing and configuration by administrators
only
IPv4 Settings
Change Password
Init.Admin.Pswd
• Viewing and configuration by
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
Printer Parts
>
Control Panel
>
iPF755 Menu Settings
9
727

Table of Contents

Other manuals for Canon imagePROGRAF iPF755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF755 and is the answer not in the manual?

Canon imagePROGRAF iPF755 Specifications

General IconGeneral
Printer TypeLarge Format Printer
Maximum Print Resolution2400 x 1200 dpi
Number of Ink Colors5
Number of Nozzles15, 360
Memory (Standard)256 MB
Hard Drive80 GB
Ink Droplet Size4 picoliters
Operating SystemsWindows, Mac OS
Print TechnologyInkjet
Ink TypePigment/Dye
Maximum Print Width36 inches
ConnectivityUSB, Ethernet
Media HandlingRoll Feed
Media Width8 inches to 36 inches
Media Thickness0.07 - 0.8mm
Ink ColorsCyan, Magenta, Yellow, Black
Media SizesRoll paper: 10"-36" (254mm-914mm), Cut sheet: 8"-36" (203.2mm-914mm)
Media TypesPlain Paper, Coated Paper, Photo Paper
Power Consumption140W or less
Print Speed (Color)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds
Print Speed (Black & White)D-sized print (33.1 x 23.4 inches) in approximately 28 seconds

Related product manuals