14. Click GScaling and enter 120.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting the J Print Centered
check box.
15. Confirm the print settings, and then click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.430 "
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF755 Resizing Originals by Entering a Scaling Value (Mac OS X)
3
83
To Next Page
Loading...
