Chapter 6
6-6
T-6-11
T-6-12
T-6-13
T-6-14
T-6-15
B5 VM_26V OUT Power supply(+26V)
B6 MISTFAN_R_ALARM IN Mist fan(R) alarm signal
B7 GND - GND
B8 MISTFAN_VM_26V OUT Power supply(+26V)
B9 MISTFAN_L_ALARM IN Mist fan(L) alarm signal
B10 GND - GND
B11 N.C - N.C
J2702
Pin Number Signal name IN/OUT Fuction
1 VM 26V OUT Power supply(+26V)
2 /DCOVER_SOL_L OUT Upper cover lock solenoid(L) drive signal
3 VM 26V OUT Power supply(+26V)
4 /DCOVER_SOL_R OUT Upper cover lock solenoid(R) drive signal
5 N.C - N.C
6 N.C - N.C
J2801
Pin Number Signal name IN/OUT Function
1 OUT_LFSP_A OUT Feed motor drive signal A
2 OUT_LFSP_VM OUT Power supply(+32V)
3 OUT_LFSP_AB OUT Feed motor drive signal AB
4 OUT_LFSP_BB OUT Feed motor drive signal BB
5 OUT_LFSP_VM OUT Power supply(+32V)
6 OUT_LFSP_B OUT Feed motor drive signal B
J3001
Pin Number Signal name IN/OUT Function
1 RGV16(VM) OUT Power supply(+32v)
2- --
3- --
4 RGV18(VM_CR) IN Upper cover lock switch output signal
J3002
Pin Number Signal name IN/OUT Function
1 TH IN Thermister output signal
2 GND - GND
3 Vout IN Temperature/humidity sensor output signal
4 +5V OUT Power supply(+5v)
J3003
Pin Number Signal name IN/OUT Function
1 /MAKITORI_UNIT IN Media take-up paper detection sensor
2 /MAKITORI_LOCK_SENS IN Media take-up on/off sensor output signal
3 /MAKITORI_VCC_ON OUT Power supply ON signal
4 MAKITORI_VM_ON OUT Power supply(+26V)
5 /MAKITORI_ENB OUT Media take-up drive enable signal
6 PHOTO_SENS_OUT IN Media take-up paper detection sensor output signal
7 VM_26V OUT Power supply(+26V)
8 VM_26V OUT Power supply(+26V)
9 VMGND - GND
10 VMGND - GND
11 +5V OUT Power supply(+5V)
12 N.C. - N.C
13 N.C. - N.C
14 N.C. - N.C
J2701
Pin Number Signal name IN/OUT Function
To Next Page
Loading...
