Chapter 8
8-13
2. Running change firmware
The specifications have been changed from the versions shown below.
iPF500/600/5000/700: Ver.1.33, iPF510/610/710/8000/9000: Ver.1.36
iPF8100/9100/8000S/9000S: Ver.1.37, iPF810/820/6000S: Ver.1.03
iPF605/6200: Ver.1.02, iPF5100/6100: Ver.1.38, iPF720:Ver.1.10
You can choose A:(default setting) or B:(if you want to use automatic stop) from Service mode.
3. iPF650/750 series, iPF6300/6350/8300 and later model
You can choose A:(default setting) or B:(if you want to use automatic stop) from User mode.
No. of non-ejecting
nozzles
1 color (per chip)
more than 0, less than
100
--- Check printout
more than 100, less
than 200
--- Check head
200 or over Check head Check head
A: (default setting) No. of non-ejecting
nozzles
1 color (per chip)
more than 0, less than
320
---
320 or over Head replacement
B: (If you want to use
automatic stop)
No. of nozzles impossible to back up
less than 30 30 or over
No. of non-ejecting
nozzles
1 color (per chip)
more than 0, less than
100
--- Check printout
more than 100, less
than 320
--- Check printhead
320 or over Replace printhead Replace printhead
A (Default setting) No. of non-ejecting
nozzles
1 color (per chip)
more than 0, less than
320
---
320 or over Head replacement
B (if you want to use
automatic stop)
No. of nozzles impossible to back up
less than 30 30 or over
No. of non-ejecting
nozzles
1 color (per chip)
more than 0, less than
100
--- Check printout
more than 100, less
than 320
--- Check printhead
320 or over Replace printhead Replace printhead
Error code Applicable printhead
Check printout 1010 LR or single-head
model
1012 R printhead
1013 L printhead
Check printhead 280C LR or single-head
model
280D R printhead
280E L printhead
Replace printhead 2827 LR or single-head
model
2828 R printhead
2829 L printhead
Code
(last 4 digits)
Panel display
(Large LCD)
Panel display
(Small LCD)
Explanation/Detection sequence Remedial Action
2811 Printhead
error
Open top cover and
replace the left
printhead.
Printhead Replace Printhd
Printhd Err
Replace Printhd
Incompatible printhead version Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
Wrong printhead.
Open top cover and
replace the
printhead.
2812 Right printhead
error
Open top cover and
replace the right
printhead.
Printhead Right
Replace Printhd
Right Printhd Err
Replace Printhd
Incompatible printhead R version Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
2813 Left printhead
error
Open top cover and
replace the left
printhead.
Printhead Left
Replace Printhd
Left Printhd Err
Replace Printhd
Incompatible printhead L version Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
To Next Page
Loading...
