Entering Sleep Mode
13WK-037
The sleep mode function reduces power consumption by temporarily disabling some internal operations of the
machine. You can put the machine into sleep mode simply by pressing
on the control panel. When the machine is
in sleep mode, the touch panel display turns off and
lights up.
● The machine may not enter sleep mode depending on the machine's operation status and conditions.
● You can set the order for starting necessary functions when you perform operations after exiting sleep
mode.
<Sleep Mode Eco Exit>(P. 740)
Exiting Sleep Mode
If <Use Motion Sensor> (Settings/Registration) is set to <On>, the machine exits sleep mode automatically when
a person is nearby.If the machine does not exit sleep mode, press . <Use Motion Sensor>(P. 740)
When You Want to Set the Auto Sleep Timer
You can use the <Auto Sleep Time> setting to automatically put the machine into sleep mode. If you want to
change the amount of time that elapses before the machine enters auto sleep mode, follow the procedure
below.
<Preferences>
<Timer/Energy Settings>
<Auto Sleep Time>
or
to set the
amount of time that elapses before the machine automatically enters sleep mode <OK>.
Energy Consumption in Sleep Mode
You can set the amount of energy that the machine consumes when it is in sleep mode. Follow the procedure
below to set the amount of energy consumed in sleep mode.
<Preferences>
<Timer/Energy Settings>
set <Sleep Mode Ener
gy Use> to <Low> or
<High>.
● For information on the location of the motion sensor, see Front Side(P. 76) .
Basic Operations
184
To Next Page
Loading...
Need help?
General
Weight and Dimensions
