Checking the Connection to the Recipient Before
Sending (Direct Send)
13WK-05Y
To successfully send faxes to the destination you intend, you can check beforehand
that the recipient is connected and ready to start communication. As the machine
bypasses memory when scanning originals, you can send faxes even if there is no
memory available.
1
Place the original. Placing Originals(P. 106)
● To send multiple pages, place the originals in the feeder. When the original is placed on the platen glass, only
one page can be sent.
2
Press <Fax> on the Main Menu. <Main Menu> Screen(P. 94)
3
Specify the destination on the Fax Basic Features screen. Fax Basic Features
Screen(P. 316)
4
Specify the scan settings as necessary. Basic Operations for Sending Faxes(P. 319)
5
Press <Options> <Direct Send>.
6
Press .
➠
The machine dials the recipient's number. When the machine connects the call, originals are scanned and
sending starts.
● The machine does not start sending when the recipient's line is busy.
Direct Send is not available in the following cases
● Any of the following scan settings are specied: <2-Sided Original>/<Different Size Originals>/<Erase
Frame>/<Job Build>/<Delayed Send>/<Finished Stamp>
● Multiple destinations are specied.
● <Limit Functions> is set to <Off> for any function when the machine is in the Department ID mode.
Conguring the Department ID Management Settings(P. 585)
Faxing
338