Fax Line Settings
13WK-016
To use the fax on the machine, register the fax number and company or department name to be displayed/printed at
the receiving party's fax machine when sending a fax. Also, set the communication channel type.
To use the fax function
● The optional product is required for faxing. System Options(P. 1121)
1
Press .
2
Press <Function Settings> <Send> <Fax Settings> <Set Line>.
3
Press <Line 1> <Register Unit Telephone Number>.
4
Enter a fax number and press <OK>.
● The fax number you registered will be notied to the recipient.
5
Enter a name in <Register Unit Name> and press <OK>.
● The name you registered will be notied to the recipient.
● Instead of the unit name you specied, you can show or print the sender's name. Basic Operations for
Sending Faxes(P. 319)
6
Select a line type in <Select Line Type>, press <OK>.
● If you are not sure what kind of line type you are using, please contact your dealer or the sales oce of your
telephone company.
Congure
the setting according to the fax option.
● You can edit the line name that is displayed in the line selection screen using <Edit Line Name for Select Line
Screen>.
<Send>(P. 775) <Fax Settings>
● You can change the display of the address list according to the selected line in <Default Address List When
Selecting Line>. <Send>(P. 775) <Fax Settings>
● You can set to display a destination's phone number on the screen or report in <Set Number Display>.
<Receive/Forward>(P. 788) <Fax Settings>
● You can set to automatically switch of the incoming fax and incoming call in <Select RX Mode>.
<Receive/
Forward>(P. 788) <Fax Settings>
Setting Up
60
To Next Page
Loading...
Need help?
General
Weight and Dimensions
