154
Network Adapter: AXIS 1610 Appendix B
Connecting Directly From Clients
Centralized control of print jobs is not available because print queues are
distributed among all clients.
When multiple jobs compete, jobs print in the order of arrival at the
network adapter.
Jobs may not arrive in the order they were sent. For example, if client 1
enters jobs A and B, and then client 2 enters job C, the print order might
be A, C, then B, if job B did not arrive at the network adapter until job A
was completed.
You must install the Print Monitor for the network adapter on each client.
When using the
Add Printer Wizard
, you must connect directly to the
network.
Since the printer port is treated as a local port, choose “AXIS CAPT Port”
in the port settings dialog box.
To Next Page
Loading...
