16 Paper Handling Chapter 2
Loading Paper into the MP Tray
The multi-purpose tray can hold up to approximately 125 sheets of
75 g/m
2
paper for high-volume printing. Acceptable paper sizes are Legal,
Letter, A4, Executive, and B5. It also accepts transparencies, envelopes,
postcards, or special paper with a maximum height of 12.5 mm.
Before loading paper on the MP tray, first select the paper delivery. For
envelopes, transparencies, labels, and other special paper, face-up
delivery must be used. Plain paper can use both the face-up and face-
down delivery methods. Face-down delivery is limited to plain paper with
weight between 64 and 105 g/m
2
. For more details, see “Selecting Paper
Delivery” on page 14.
Follow the steps below to load a stack of paper.
Make sure that the input paper support is inserted into its slot in the
printer.
To Next Page
Loading...
Need help?
General
