2. Connect the device to the PC with the USB cable.
3. Turn on the device on standby.
4. Press [Menu] key to upgrade firmware in User mode.
System Management Settings > Update Firmware > Via PC
The message, "Will you restart the device to upgrade firmware?", is shown on the display. Select [Yes].
5. Press [OK] to automatically restart the device. "***DOWNLOAD MODE***" is shown on the display.
6. Wait for the motor of the host machine to stop.
NOTE:
Press STOP key to cancel Download mode and return to the normal operation.
Downloading System Software
1. Open UST.
2. Take a note of the firmware version to upgrade and click [Next] button.
3. Click [Next] button.
6. Troubleshooting
245
To Next Page
Loading...
