Canon MF724Cdw - Page 286

COPIER > FUNCTION > CCD
Item Description
Title CIS intensity adjustment in ADF (color)
Details To adjust the black/white level of the CIS for ADF scanning automatically by setting the paper
which is usually used by the user on the ADF. (For color scanning)
Use case • When replacing the Reader Unit
• When replacing the CIS Unit
Adj/set/operate method 1. Set paper on the ADF.
2. Select the item, and then press Yes key.
Related service mode COPIER > FUNCTION > CCD > BW-AGC
BW-AGC
Title CIS intensity adjustment in ADF (B&W)
Details To adjust the black/white level of the CIS for ADF scanning automatically by setting the paper
which is usually used by the user on the ADF. (For B&W scanning)
Setting values of the following service modes are automatically calculated:
COPIER > ADJUST > CCD > OFST-BW0
COPIER > ADJUST > CCD > OFST-BW1
COPIER > ADJUST > CCD > OFST-BW2
COPIER > ADJUST > CCD > GAIN-BW0
COPIER > ADJUST > CCD > LED-BW-R
COPIER > ADJUST > CCD > LED-BW-G
COPIER > ADJUST > CCD > LED-BW-B
Use case • When replacing the Reader Unit
• When replacing the CIS Unit
Related service mode COPIER > FUNCTION > CCD > CL-AGC
COPIER > ADJUST > CCD > OFST-BW0
COPIER > ADJUST > CCD > OFST-BW1
COPIER > ADJUST > CCD > OFST-BW2
COPIER > ADJUST > CCD > GAIN-BW0
COPIER > ADJUST > CCD > LED-BW-R
COPIER > ADJUST > CCD > LED-BW-G
COPIER > ADJUST > CCD > LED-BW-B
■ CLEAR
COPIER > FUNCTION > CLEAR
Item Description
R-CON
Title Initialization of Reader / ADF
Details To initialize the factory adjustment values of the Reader / ADF.
Use case When clearing RAM data of the Main Controller PCB
Adj/set/operate method Press Yes key.
SRVC-DAT
Title Clearing of service mode setting values
Details To clear the service mode setting values.
The user mode setting values are not cleared.
The factory adjustment values of the Reader / ADF are not initialized.
Adj/set/operate method 1. Press Yes key.
2. Turn OFF / ON the main power switch.
COUNTER
Title Clearing of service counter
Details To clear the counter by maintenance / part/mode.
The numerator printed on a system dump list becomes 0.
Adj/set/operate method 1. Press Yes key.
2. Turn OFF / ON the main power switch.
HIST
Title Clear of logs
Details To clear the communication management / print / jam / error log.
Use case When clearing logs
8. Service Mode
278