Canon MV830 - Reviewing a Still Image Right after Recording

95
E
Using a Memory Card
Reviewing a Still Image Right after
Recording
You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been
recorded.
Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a
setting option and close the menu.
 A still image is displayed as long as you hold the PHOTO button after recording.
 The FILE OPER. menu appears when you press the SET dial while you are
reviewing a still image, or when you press the SET dial right after recording. In
this menu, you can protect ( 103) or erase ( 104) the image.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
(36)
CAMERA SETUP REVIEW ••••••• 2sec