PC-D320/PC-D340/FAX-L400 Chapter 4: Maintenance and Service
4-14
“SUPPLY REC. PAPER”
Cause: (1) Either recording paper run out or there is no recording paper cassette loaded.
This is displayed when the recording paper sensor detects no paper.
(2) Either recording paper run out or there is no recording paper multi-purpose
tray loaded.
Solution: (1) Refill the recording paper in the cassette.
(2) Refill the recording paper in the multi-purpose tray.
(3) Install the paper correctly.
(4) Check if the Recording paper sensor is operating correctly using the
methodes given in this chapter, 6.7 Faculty Tests, Test mode [6] Faculty
test, [3] Sensor tests.
(5) Check the Recording paper sensor on the ECNT board (PS201) and
actuator.
(6) Replace the ECNT board.
(7) Replace the SCNT board.
“SYSTEM ERROR”
See Printer error codes (E000, E100, E805)