Canon PC880 - Copying Thick Books or Large Originals; Detaching the Platen Glass Cover

Canon PC880/860 Operator’s Manual ENGLISH
40
4
Proceed to copy the second original to finish making your two-
sided copy.
...............................
Copying Thick Books or Large Originals
(Detaching the Platen Glass Cover)
When copying thick books, large originals, or three-dimensional objects, detach the platen glass cover.
Detaching the Platen Glass Cover
1
Raise the platen glass cover.
...............................
2
Lift the platen glass cover straight up and pull it out.
NOTICE:
I When pulling out the platen glass cover, hold it with both hands so that
it does not fall forward.
Making Copies
3
Place your original on the platen glass. Then, Press the Start ( )
key.
I For instructions on how to set the copying features, see pp. 32 through
38.
REQUEST:
I The maximum allowable weight that can be placed onto the platen
glass is 2 kg.
I Do not press down on the original with excessive force.
...............................
Attaching the Platen Glass Cover
4
Insert the tabs on the platen glass cover into the holes of the main
unit.
REQUEST:
I When you finish copying, make sure to firmly insert the platen glass
cover into the twe holes on the left and right side of the copier, and
then lower the platen glass cover.
...............................