33
Basic Functions
Turning On the Camera without the Start-Up Sound and Start-Up Image
Hold the SET button down while turning on the power.
Power Saving Function
This camera is equipped with a power saving function.
When this function is turned on and it activates, restore power by pressing
the ON/OFF button.
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor automatically turns off 1 minute*
after the last control is accessed even if [Auto
Power Down] is set to [Off].
(Press any button
except the ON/OFF button to turn the LCD
monitor back on.)
* This time can be changed (p. 138).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Connected to a Printer (sold separately):
Powers down approximately 5 minutes after the
last control is accessed on the camera or on a
connected printer.
• The power saving function will not activate during auto play or while the
camera is connected to a computer.
• The power saving function can be turned off (p. 138).
To Next Page
Loading...
