141
Using
the
Software
on
the
Windows
Platform - Preparations
8
When
the
installation
is
over, select
[Restart computer immediately
(Recommended)] and click [Restart].
At
this stage, do
NOT
remove the Solution
Disk
from
the CD-ROM drive yet.
Installation
of
the software has
been
completed.
!ElRestart computer immediately (Recommended)
If there
is
no need
to
restart the computer, the [Finish] screen will display. Click [Finish],
remove the Solution Disk from the CD-ROM drive and proceed
to
Step 10.
9 Remove
the
disk from
the
CD-ROM drive when your
normal desktop screen appears
after
restarting.
This
concludes the software installation.
Continue
by
connecting the camera
to
the computer
so
that
the
USB
driver
can
be
utilized.
See
Uninstalling the Software (p. 74)
to
delete
the
installed programs.
10 Attach
the
camera
to
the
computer
with
the
interface cable and set
the
camera
to
the
correct mode
for
connecting.
To Next Page
Loading...
