Procedures
for
attaching
the
camera
to
the
computer and placing
the
camera
in
the
correct mode
for
connecting vary between camera models.
See
the
Camera User Guide.
If the Digital Signature Not Found
window
appears, click
[Yes].
The
USB
driver will automatically finish installing onto the computer when you attach the
camera and open a connection.
Dialogs similar
to
the following will appear during this process (first time the camera
is
connected
to
a computer only).
WindowsXP
The
dialog on the right will appear after a
few
moments.
Windows 2000/Windows Me/Windows
98
SE
Restart the computer according
to
the instructions if you are prompted
to
do
so
by
a
message.
A dialog allowing you
to
set the default settings will display after installation.
See
Using
the Software on the Windows Platform -
The
Basics
(p.
16)
for
the subsequent
proced u
res.
•
See
USB
driver installation
not
proceeding
well
in
the
Troubleshooting
section (p. 78)
if
you are having problems installing
the
USB
driver.
•
See
Uninstalling the
USB
Driver (p. 75)
to
delete
the
USB
driver installed
with
these procedures.
•
See
If
You
Were Using ZoomBrowser EX Version 2
or
3 (p. 85)
if
you
were
previously using either version.
This
concludes the software and
USB
driver installation and the procedures
for
connecting the
camera
to
the computer.
You may
now
download camera images
to
the computer (p. 16).
To Next Page
Loading...
