After closing the feed slot cover, the paper information registration screen for the rear tray appears on
the LCD.
8.
Press the OK button.
9.
Use button to select size of loaded envelopes on rear tray and press OK button.
Note
• The (asterisk) on the LCD indicates the current setting.
10.
Use button to select Envelope and press OK button.
Follow the instructions of any messages displayed to register the paper information.
11. Pull out paper output tray (F) and extend paper output support (G).
Be sure to pull out the paper output tray before printing. If not, printing will not start.
101
To Next Page
Loading...
