1689
Cause
Printer detected ink out condition.
What to Do
Replace the ink tank and close the top cover.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the printer.
If you want to continue printing, you need to disable the function for detecting the remaining ink level. To
disable this function, press and hold the printer's Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition or by using refilled ink tanks.
Note
• If you disable remaining ink level detection, (the letter under the icon represents the ink color) will
be displayed on the standby screen on the printer.
414
To Next Page
Loading...
