Why is the top page of my Canon VB-M40 not displayed?
If the top page of the camera isn't showing, verify that the LAN cable is correctly connected. Also, ensure that the network the camera is connected to is set up correctly, specifically checking the IP address, subnet mask, and default gateway address. If you changed the IP address, remember to reboot the camera for the new address to take effect.
How to fix a Canon VB-M40 Security Camera that does not start?
If your camera isn't starting, check the following: If you're using a PoE HUB, make sure the LAN cable is correctly connected. If you're using an optional AC adapter, ensure it's properly connected. Also, try turning the camera off and then on again.
Why can't I use the 'Record Now' feature in Canon Software?
If the [Record Now] feature cannot be used in Canon Software, make sure that the camera is not disabled on the [Advanced] tab in [ Properties]. If the camera is disabled, click [Enable Camera].
Why does Canon Software say no video is found in the timeline?
If you tried to save a recording in Canon Software, but an error message is displayed telling you that no video can be found in the selected timeline segment, make sure that a recorded image is included in the selected portion of the timeline.
How to improve the quality of live images in Canon Software?
The quality of live or recorded images displayed in the Canon Software video window cannot be changed. The video quality may depend on the camera settings of the video window. The video quality for the camera can be increased using the settings on the camera.
Why can't I see layouts created by other users in Canon Software?
If you try to use layouts created by other users in Canon Software and the [Layouts] menu is not displayed, layouts saved in the [User Layouts] folder cannot be seen by other users. To allow all users to access layouts created by a user, the layouts must be created by a user with administrator permissions and must be saved in the [Shared Layouts] folder.
Why is 'Record Now' grayed out in Canon Software?
If the [Record Now] feature is grayed out (unavailable) in a Canon Software video window, display [Properties] for the video window and check on the [Advanced] tab whether the camera is disabled. If the camera is disabled, click [Enable Camera].
How to enable pan, tilt, and zoom in Canon Software?
If you cannot use the pan, tilt, or zoom feature of the camera in the Canon Software video window, double-click the video window or click [Control] on the [Camera Control] panel. If images are being played (the title bar of the video window is gray), you cannot operate the camera. Click [Live] on the timeline to gain control.
What to do if Canon Software recording is suspended due to low disk space?
If Canon Software recording is suspended due to low disk space, shorten the maximum storage period or add a hard disk. Additionally, try modifying the recording schedule.
How to resolve Canon Software recording frame rate reduction?
If the Canon Software recording frame rate is reduced due to high load issues, modify the recording schedule. Check the current CPU usage and terminate any applications that are a heavy load on the CPU.
General| Total megapixels | 1.3 MP |
|---|---|
| Maximum resolution | 1280 x 960 pixels |
| Supported video modes | - |
| Video formats supported | H.264 |
| Supported graphics resolutions | 160 x 120, 320 x 240, 1280 x 960, 640 x 480 (VGA) |
| Pan range | -170 - 170 ° |
| White balance | Auto, Manual |
| Tilt angle range | -90 - 10 ° |
| Minimum illumination | 0.01 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Digital zoom | 4 x |
| Optical zoom | 20 x |
| Focal length range | 4.7 - 94 mm |
| Built-in HDD | No |
| Card reader integrated | Yes |
| Compatible memory cards | SD, SDHC |
| Form factor | Covert |
| Product color | Black |
| Type | IP security camera |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Interface | RJ-45 |
| Headphone outputs | 1 |
| Cabling technology | 10/100Base-T(X) |
| AC input voltage | 100-240 V |
| Power source type | PoE |
| AC input frequency | 50 Hz |
| Storage temperature (T-T) | 5 - 85 °C |
| Operating temperature (T-T) | -10 - 50 °C |
Weight and Dimensions| Width | 132 mm |
|---|---|
| Height | 155 mm |
| Weight | 1150 g |
Notes on trusted sites and security settings for Windows Server and Internet Explorer.
Methods for setting camera angle and creating specification files for multiple cameras.
Methods for adjusting camera angle using the image display and changing zoom ratio.
Step-by-step guide for registering certificates required for Admin Tools and Admin Viewer.
Detailed configuration for network parameters including IP addressing and security.
Settings for image size, quality, frame rate, and bit rate for video transmission.
Configuration for general upload methods and HTTP/FTP specific settings.
Settings for image transmission, audio reception/transmission, and HTTP server.
Configuration for image buffering, volume detection, and timer-based events.
Settings for external device input events and audio playback options.
Configuration for IPsec security using auto key exchange or manual settings.
Overview of admin tools and descriptions of each tool's functionality.
Interface overview and procedures for setting privacy mask areas.
Steps for modifying existing privacy mask areas or deleting them.
Overview of the tool, capturing, saving, deleting, and loading panorama images.
Interface overview and procedures for setting view restrictions on the camera feed.
Methods for setting camera presets, detailed settings, and configuring preset tours.
Overview of the log viewer interface, downloading, saving, searching, and filtering logs.
Methods for adjusting camera angle and zoom ratio using sliders and panorama display.
Controlling the camera using presets and adjusting for backlight.
Using the Viewer PTZ panel for magnifying, adjusting frame size, and moving the preview.
How to open and close various control items within the viewer interface.
Information on accessing and managing data stored on SD memory cards.
Common problems and their solutions for camera operation and software issues.
Lists of camera log messages and viewer information/warning/error messages.
Procedures for restoring initial settings via web browser or factory default via reset switch.
A comprehensive list of all factory default settings for the camera.
To Next Page
