Setting Page
105
[Sodium Lamp] (approx. 2,000K)
Select this when capturing under an orange sodium lamp.
[Halogen Lamp] (approx. 2,700K - 3,200K)
Select this when capturing under a halogen lamp or incandescent lamp.
[One-shot WB]
If you set white balance to [Manual], this will force the white balance to match the light source and lock the setting.
Setting Method Example:
Illuminate a white subject (white paper, etc.) using the light source, making sure the subject fills the entire screen, and then
click [Exec].
[R Gain]
If you set white balance to [Manual], set the Red gain values.
[B Gain]
If you set white balance to [Manual], set the Blue gain values.
[Noise Reduction]
Select a noise reduction level. This setting is generally more effective in low-light conditions.
When set to [Strong], the noise reduction effect is increased, but residual images are more likely to appear.
When set to [Mild], the noise reduction effect is decreased and resolution is increased, but the video file size becomes
larger.
[Sharpness]
Select a sharpness level.
When set toward [Strong] the video becomes sharper, and when set toward [Mild] the video becomes softer.
When set toward [Strong] the video file size becomes larger.
[Color Saturation]
Select a color saturation level.
[Haze Compensation]
If the subject is obscured by haze, this adjusts contrast in the video to improve subject visibility.
[Manual]
Set the level of compensation in [Haze Compensation Level].
[Auto]
Automatically performs haze compensation. Select the compensation strength in [Haze Compensation Strength (Auto)]
(P. 97).
• When [Auto] or [Manual] is selected for [Haze Compensation], the video data size may increase.
• If using [Haze Compensation] causes a strong difference in video brightness, set [Haze Compensation] to [Manual] and set [Haze
Compensation Level] weaker.
[Haze Compensation Level]
When Haze Compensation is set to [Manual], set the compensation level.
[Day/Night]
Select a capture mode according to the brightness of the installation environment.
• When [Day/Night] is set to [Night Mode] (including when it is set to [Auto] and Night Mode is judged to be applicable), the white
balance function cannot be used.
• If a subject that seldom changes is captured in a location where the light source changes gradually, such as when capturing a subject
continuously day and night, appropriate colors may not be achieved. In this case, appropriate colors can be achieved by changing the
captured video with settings such as [One-shot WB].
[Haze Compensation] cannot be used if [Smart Shade Control] is set to [Auto] or [Manual].
To Next Page
Loading...
