Canon VB-S910F - [Maintenance] > [General]; Displaying Camera Device Information and Perform Maintenance; Device Information; Tool

Setting Page
5
199
Check camera information, such as the firmware version, and perform maintenance on the camera system.
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build Number] and [MAC Address]
Displays information about the camera.
Tool
You can configure/reboot the camera and display licenses.
[View Current Settings]
Display a list of current settings for the Setting Page.
[View License]
Display information on the third-party software licenses.
[Reboot]
Reboot the camera.
Initialization
Initialize the camera.
[Network Settings]
If you set this to [Save], the following settings are retained when initializing.
• Administrator Name
• Administrator Password
• Network Settings
• NTP Server
•HTTP Server
[Maintenance] > [General]
Displaying Camera Device Information and Perform
Maintenance
Caution
• You must not turn off the camera while [Restore Default Settings] is in operation. Turning off the camera at this stage
may result in disabling its ability to boot correctly.
• Once [OK] is clicked, you can no longer stop the process of restoring the default settings.
The following settings can be configured here.
• Device Information
• Tool
• Initialization