162
You can register up to 15 detection settings.
The detection settings added to [Detection Settings] are displayed and [Enable these detection settings] is
selected.
• To disable the detection settings, clear the [Enable these detection settings] checkbox.
• Enter the [Detection Settings Name] if necessary (P. 166).
• To delete detection area settings, select the detection area settings to delete and click [Delete] in Detection Settings (List).
2
Click [Add] in [Detection Settings].
3
Select [Detection Settings Number] (1 to 15) and [Detection Type] for the detection setting to be added.
4
Click [OK].
To Next Page
Loading...
