Setting Page
189
If you select [HTTPS], HTTP access is also redirected to HTTPS to perform SSL/TLS communication.
• It may take a few minutes to generate an SSL/TLS key.
• Depending on the type of the certificate being installed on the camera, a dialog box may be displayed indicating that the web browser
has accepted the certificate and a connection can be made. If the dialog box is not displayed, register the CA certificate in the web
browser.
• Even if you set SSL/TLS communication here, SSL/TLS communication is not performed unless you install a certificate.
• Video distribution performance decreases when performing SSL/TLS communication. If you set [HTTPS], you cannot connect with the
RM.
To Next Page
Loading...
