220
S017 qtimer service started or shut down
[info]
S070 Change to certificate [info]
wvhttp notification
W001 Starting and stopping of system [info]
W030 Startup and shutdown of WebView
Livescope Client [info]
W031 Transmitted video data size [info]
W040 Clearing to external memory [info]
Audio server notification
B001 Starting and stopping of audio server
[info]
B011 Audio client connected [info]
B012 Audio client closed [info]
Camera application notification
C001 Starting and stopping of camera control
module [info]
C002 Camera application started and
stopped [info]
Description %1 qtimer (S017)
%1 (starting) or (stopping)
Meaning The qtimer service was started or shut
down.
Description %1: succeeded to %2 certificate
(S070)
%1 ssl or 802.1X
%2 generate | load | delete | restore
Meaning A certificate was generated/loaded/
deleted/restored
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) has started or
stopped.
Description %1%2 host=<Host>, user=<User>,
prio=<Priority>(W030)
%1 W: WebView session, V: Session-less
video client, N: Session-less event
client
%2 +: Connect, -: Disconnect
Meaning The camera server client was
connected or disconnected.
Description %1= host=<Host>, user=<User>,
video=<jpg|h264>:<Number of
frames> (W031)
%1 W: WebView session, V: Session-less
video client
Meaning When a client disconnected, the total
data that was sent to the client is
displayed in number of frames.
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut
down.
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
Description [%1] %2 closed n=%3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
Description starting cameraappl (C002)
Meaning The camera application started.
To Next Page
Loading...
