Camera Viewer
71
• To transmit audio, you must first set [Video and Audio] > [Audio] > [Audio Server] > [Audio Reception from Viewer] to [Enable] on
the Setting Page (P. 137).
• While the icon is active (purple), audio is constantly transmitted even if you close the [Video and Audio] menu.
• If [Audio Communication Method] is set to [Half Duplex] in [Video and Audio] > [Audio] > [General Audio] on the Setting Page
(P. 136), there is no sound sent from the camera to other users while the administrator is transmitting audio. Therefore, even if the
[Audio Reception] button (P. 70) is active (purple), audio input from the microphone cannot be received.
3
In [Input Volume], adjust the volume to an appropriate level using the slider.
To Next Page
Loading...
