Canon WUX6000 User Manual

45
Step 3 Adjust the Image
Operation Projecting an Image
Adjusting Image Size
The size of the projected image can be adjusted by pressing the ZOOM button on
the remote control or the LENS button on the projector. Change the projector
installation position if your desired image is too large or too small to adjust it with
the zoom function. (P118)
1 Press either the ZOOM button on the remote control or the LENS button
on the projector twice to display the zoom adjustment window.
2 Press the pointer buttons to adjust the image size.
3 When the desired image size is selected, press the OK button or the
ZOOM button.
When the Short Fixed Lens (RS-IL03WF) is attached, digital zoom adjustment is
performed in place of optical zoom adjustment.
Remote control Projector
Press twice.
To enlarge the image, use the [ ] / [ ] buttons on the remote control or
projector.
To reduce the image, use the [ ] / [ ] buttons on the remote control or
projector.
To continue adjusting the size in a specific direction, hold down the [ ] / [ ] /
[ ] / [ ] buttons on the remote control or projector.
Screen
Remote control
Projector
Downloaded From projector-manual.com Canon Manuals

Canon WUX6000 Specifications

General

Brightness	6000 lumens
Resolution	WUXGA (1920 x 1200)
Contrast Ratio	1000:1
Light Source	Lamp
Dimensions	15.2 x 12.4 x 5.5 inches
Lens Options	Optional lenses available
Zoom Ratio	1.6x
Lens Shift	Vertical: ±60%, Horizontal: ±10%
Lens Zoom Ratio	1.6x
Connectivity	HDMI, DVI-D, VGA, USB, RS-232
Lamp Type	UHP
Input Connectors	HDMI, DVI-D, VGA, USB, RS-232
Lamp Life	Up to 3000 hours (Normal mode), up to 4000 hours (Eco mode)