32
English
[SPS] / [SPEAKER SETUP]
• [CHL] / [CHANNEL LEVEL]
Setting the volume of each speaker individually
• [DST] / [DISTANCE]
Setting the hearing distance of each speaker individually
• [VOI] / [VOICE]
Improves speech intelligibility in dialogues
• [EQ ] / [EQUALIZER]
Select setup location: [EQ1] = free, [EQ2] = near-wall, [EQ3] = in a corner
• [DRC] / [DYNAMIC RANGE]
Automatic dynamic range control for Dolby
®
Digital input streams
[SYS] / [SYSTEM SETUP]
• [SLP]/ [SLEEP TIMER]
Setting the Auto Power Off Timer (15, 30, 45 or 60 minutes)
• [IRM] / [IR MENU]
• [IRL] / [IR LEARN]
Learning infrared commands from another remote control (e.g. TV)
• [DIL] / [DIRECT INPUT]
Learning infrared commands for direct input selection
• [CLR] / [IR CLEAR]
Deleting the learned infrared commands
• [STB] / [STAND BY MODE]
Setting the Standby Mode (ECO = Eco-mode, NSB = Powering of all
speakers, MAN = Manual on/off, AUT = Auto-mode on/off)
• [SEL] / [INPUT SELECT]
Automatically selects input to running source
• [INP] / [INPUT CONFIG]
Adjust input designations to the connected sources
• [PHA] / [PHASE SUB] (only available for connected subwoofer)
Adjusting the Phase between Smart Speaker and Subwoofer
• [SSM] / [SUB STEREO MODE]
Using the subwoofer also in PlayMode Stereo
To Next Page
Loading...
