CanyCom S100 - Page 35

- 29 -
before
Maintenance
7
Item
Content of inspection
Inspection
interval
Remarks
Checks
starting
Monthly
Annually
Engine
Engine proper
Engine
compres-
sion
• If the engine is operating abnor-
mally, or if the exhaust condition at
idle or at high RPM is abnormal,
check the engine compression.
If you hear valve noise or
the engine is not running
smoothly, check valve
clearance.
○
Please contact your
Canycom distributor
for inspection.
Engine
mount
• Check engine base for cracks or
deformities.
No cracks or deformi-
ties.
○
○
○
• Check for loose or missing
mounting bolts or nuts.
There must be no loose
or missing mounting
bolts or nuts.
○
○
○
Lubrication
system
• Check oil level and dirt in oil.
Oil level must be correct.
There must be no marked dirt.
○
○
○
Inspection / replacement:
See page: 34
• Check for oil leakage from head
cover, oil pan, pipes, etc.
There must be no
marked oil leakage.
○
○
○
• Check for dirty or clogged filter.
There must be no dirt
or clogging.
○
Replacement:
See page: 43
Fuel system
• Check for fuel leakage from fuel
tank, injection pump, hoses,
pipes.
There must be no fuel
leakage.
○
○
○
• Check for damage or deterio-
rated fuel hoses.
There must be no dam-
age or deterioration.
○
○
○
• Check for dirty or clogged fuel
filter cartridge.
There must be no dirt
or clogging.
○
○
Cleaning: See
page: 43
• Check for any abnormality in
injection pressure or spray con-
dition of injection nozzle.
* If there is no abnormality in the
exhaust or rotation condition
when idling or accelerating, this
inspection can be omitted.
Must be specified injec-
tion pressure, and
spray must be normal.
○
Please contact your
Canycom distributor
for inspection.
Cooling sys-
tem
• Check for cooling water level,
dirty water.
Water level must be
correct, there must be
no marked dirt.
○
○
○
Inspection: See
page: 38
• Check for any water leakage
from radiator, engine, water
pump, hoses . Check for
clogged radiator fins.
There must be no water
leakage or clogging.
○
○
○
• Check for damage or deterio-
rated fuel hoses.
There must be no dam-
age or deterioration.
○
○
○
• Check that radiator cap valve
functions properly.
Must function properly.
○
• Check for damaged valve seat
surface of radiator cap.
There must be no dam-
age.
○
• Check the fan belt for tension.
Must be within a stan-
dard value.
○
Inspection / Adjustment:
See page: 46
• Check the belt for wear and
damage.
Must not be worn remark-
ably nor damaged.
○
• Check for cracks, damage,
or deformation of cooling fan,
cover, duct.
There must be no
cracks, damage, or
deformation.
○
• Check for loose mounting bolts
or nuts of cooling fan, cover.
There must be no loose
outing bolts or nuts.
○