CanyCom S160 - Page 71

Troubleshooting
-62-
6
Area Malfunction Possible Cause Corrective Measure Ref.
Brake
Brake does not work
well.
Not properly adjusted. →Adjust. Page 52
Brake is wet with water. →Apply brake a few
times to dry.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Track
Track does not move
smoothly.
Not properly adjusted. →Adjust. Page 46
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Safety
Devices
Lamp does not light.
Blown bulb. →Replace.
Blown fuse. →Replace. Page 56
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Horn does not work.
Blown fuse. →Replace. Page 56
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Hydraulic
(dump
and turn)
system
Dump or turn does not
work.
Insufcient or
deteriorated hydraulic
uid.
→Add or change uid. Page 47
Other (other than the
above).
→Please contact
your CANYCOM
representative.