2.
Charging the FREECOM 1
To charge the FREECOM 1:
1.
Connect the USB cable Type A plug to either the wall charger supplied with your FREECOM 1, or to a computer
USB port.
2.
Connect the USB cable Type B plug to the FREECOM 1 USB port.
During charging, the LED indicates charging status as follows:
●
red LED on - charging
●
red LED off - charging complete
Make sure that your FREECOM 1 battery is fully charged for at least 4 hours before initial use.
Charging with the wall charger is faster than via a computer USB port.
Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on. (see
Section 3.2 - Switching Your Unit On/Off).
To Next Page
Loading...
