Cardo Systems PACKTALK CUSTOM User Manual

2. GETTING STARTED
2.1 GETTINGTOKNOWYOURPACKTALKCUSTOM
2.2 CHARGINGYOURPACKTALKCUSTOM
Make surethat your PACKTALKCUSTOM battery ischarged for at least 4 hoursbefore initial use.
To charge the unit:
1. Using the supplied USBcable, connect your computer or wall charger to the USB port on your PACKTALK
CUSTOM.
2. Fast charging:
● You will have 2 hoursof talk time after 20minutesof charging. (1.5 - 2 hoursfor full charge).
While charging, the LED indicatesthecharging statusasfollows:
● Red LED on — charging
● Red LED off — charging complete
TIP:You can check thebattery charge at any time in the Cardo Connect App.
You can also say "Hey Cardo, battery status".
4

Cardo Systems PACKTALK CUSTOM Specifications

General

Brand	Cardo Systems
Model	PACKTALK CUSTOM
Category	Intercom System
Language	English