Cardo Systems PACKTALK CUSTOM User Manual

The LED flashesred three times, confirming that your unit isswitching off.The speaker playsasound and a
voice message indicatesthe battery status,"Battery StatusX%".
2.5 USINGYOURPACKTALKCUSTOM
You can operatethe variousfeaturesof your PACKTALKCUSTOM in the following ways:
● Pressabutton or a combination of buttonson theunit
● UsetheCardo Connect App on your mobile device (onceit ispaired with the unit)
● Usenatural voice operation (by saying acommand,for example "Hey Cardo, Radio On").
2.6 PAIRINGYOURUNITTOBLUETOOTH DEVICES
Your PACKTALKCUSTOM hasone Bluetooth channel for connection to Bluetooth devicessuch asmobile phones,
GPSdevices,and TFT BikeInfotainment.
A second Bluetooth channel for second phone,GPSor TFTisavailable with Pay-Per-Feature.
To connect your unit to a Bluetooth device, you must first pair them. Once paired,they automatically recognize
each other whenever they are within range.
● If you arepairing the unit to more than one mobile phone,the phone paired with channel 1 isthe default
phone for outgoing calls.
To pair to a mobile phone:
1. Enable Bluetooth on your mobile phone.
2. On the unit in standby mode,press for 5 seconds.
The LED flashesred and blue.
3. On your mobile phone,search for Bluetooth devices.
4. When your PACKTALKCUSTOM appearsin thelist of available devices,select it.
If prompted for a PINor Passkey,enter 0000(four zeros). If prompted to allow pairing on your phone,allow it.
6

Cardo Systems PACKTALK CUSTOM Specifications

General

Brand	Cardo Systems
Model	PACKTALK CUSTOM
Category	Intercom System
Language	English