Cardo Systems PACKTALK CUSTOM User Manual

5.1.1.3 LEAVINGDMCINTERCOM GROUPS
You can leave a DMCgroup , by deleting the group from the Cardo Connect App or by doing a full factory reset.
If you leave a DMC intercom group, you must rejoin it if you want to connect to it again in the
future.
5.1.2 USINGDMCINTERCOM
5.1.2.1 ADDINGANON-DMCPASSENGER
You can use the DMCbridging feature to add a non-DMCpassenger to theintercom group.
To bridge a non-DMC passenger:
1. To add a Bluetooth passenger,use theCardo Connect App:
2. The non-DMCpassenger startsuniversal intercom pairing,Bluetooth intercom pairing or OBi pairing on his
unit.
To start/stop a non-DMCpassenger intercom:
● Tap 3 times.
5.1.2.2 CHATTINGPRIVATELY
You can chat privately with aspecific member of your DMCgroup.
This option is also available using the Cardo mobile app.
23

Cardo Systems PACKTALK CUSTOM Specifications

General

Brand	Cardo Systems
Model	PACKTALK CUSTOM
Category	Intercom System
Language	English