Carel Macroplus - Temperature Probe Connection

7
+
Bn
M
Macroplus Connector Probe contacts
+ 7
T 8
M 9
- 10
7 +
11 H
10 -
9 M
c da b
-
e
+
OUT
-
Connections "a" Connections "b"
Temp./Humidity probes Temp./Humidity probes
(code SAP00A/P) (code SSD0MHT)
(code STH0AP) (code SSD0HHT)
TEMPERATURE / HUMIDITY TWO-OUTPUT ACTIVE PROBES (4 WIRES)
+
Bn
M
_
Macroplus connector
Probe contacts
a b
7 +
8 T
9 M
11 H
Bm
Connections "a" Connections "c"
Temperature probes Humidity probes
(code SST00A00/1) (code SHW00P0420)
(code SST00A04020) NTC Temperature probes
(code STH0NTC0/1)
Connections "b"
Humidity probes
(code SSD0MH00/1)
(code SSD0HH00/1)
+
Bn
M
_
Macroplus connector
Probe contacts
a b c
7 + 7
8 H 11
9 M 9
TEMPERATURE / HUMIDITY ONE-OUTPUT ACTIVE PROBES (3 WIRES)
TEMPERATURE/HUMIDITY TWO-OUTPUT ACTIVE PROBES
(5 WIRES)
Connections "a" Connections "c"
Temperature probes Humidity probes
(code SSW00A) (code SHP00P)
(code SSD00A) (code SHW00P)
(code SSI00A)
(code SSC00A) Connections "d"
(code SSE00A) Humidity probes
(code SSD0MH)
Connections "b" (code SSD0HH)
Temperature probes
(code STP00A) Connections "e"
(code SST00A) Temperature probes
(code SST00B....)
TEMPERATURE/HUMIDITY ONE-OUTPUT ACTIVE PROBES (4 WIRES)
- TEMPERATURE PROBES CONNECTION -
Connect the probes to Macroplus as indicated in the figure below (the layouts refer to all temperature and humidity
probes by Carel).
The newly built active probes do not have the negative terminal.
+
Bn
M
_
Macroplus connector Probe contacts
a b
7 +
8 T
9 M
10 -
11 H
Bm
Connections "a" Connections "b"
Temp./Humidity probes Temp./Humidity probes
(code STH0AP00/1) (code SSD0MHT0/1)
(code SSD0HHT0/1)