Carel MPXPRO - Page 56

56
ENG
MPXPRO - + 0300055EN rel. 1.0 30/08/10
Buttons / Associated function
Network
defrost
• Local defrost
• Network defrost
• Continuous cycle
• Enter HACCP
• Enable /Disable
aux/light output
• Continuous cycle
• Mute
• Enter
HACCP
Tab. 7.i
Active buttons
H6 H6
0 YES YES YES YES 8 YES YES YES NO
1 NO YES YES YES 9 NO YES YES NO
2 NO NO YES YES 10 YES NO YES NO
3 NO NO NO YES 11 NO NO YES NO
4 YES YES NO YES 12 YES YES NO NO
5 NO YES NO YES 13 NO YES NO NO
6 YES NO NO YES 14 YES NO NO NO
7 NO NO NO YES 15 NO NO NO NO
Tab. 7.j
Htc: Clock  tted
Par. Description Def Min Max UoM
Htc Clock  tted
0 = not  tted
001-
Tab. 7.k
Indicates whether or not the real time clock is  tted:
• Htc = 0: clock not  tted, Htc = 1: clock  tted.
If the parameter is set to 0 and the operator physically installs the optional
real time clock card (MX3OP48500) with the controller o , when restarting
the parameter is automatically set to 1. If set to 1 when the clock is not
 tted, the ‘Etc’ alarm is activated.