Carel MPXPRO - MPXPRO Mounting and Terminal Access

11
ENG
MPXPRO - + 0300055EN rel. 1.1 30/08/10
2. INSTALLATION
2.1 MPXPRO: DIN rail assembly and
dimensions
PUSH
137 111
81 109
MPXPRO
High
voltage
Fig. 2.a
Accessing the terminal block
Fig. 2.b
To remove the cover:
1. press the sides;
2. remove the cover.
Fig. 2.c
To remove the covers:
1. press the sides of the cover at the points of coupling;
2. remove the cover.
MPXPRO optional connections
Fig. 2.d
1. Press the cover to remove it;
Fig. 2.e
2. Plug the MXOPZKEYA0/IROPZKEYA0 key into the connector provided.
Note: for models with  rmware version ≤ 1.2 only use the
IROPZKEYA0 key.
2
1