2-10 9G3886_en 2011-03-31
Basic Operating Tasks
Using the Web Portal to access additional functionality
The Web Portal is your interface to additional features. In addition to
the installation and setup of your system, you can view and manage the
laser imager's connections over the network, configure features, view
error messages and access general status information at the Web Portal.
You can also check film count, film size, and film type.
Troubleshooting tools include:
• Optimization of image quality for modalities.
• Retrieval of logs, statistics, and system status.
• Diagnostic utilities, including backup and restore.
The Web Portal provides an online Help system and a user’s guide to
assist you.
Accessing the Web
Portal
To access the Web Portal, use a desktop or laptop computer that is
connected to the network.
1. On a desktop or laptop computer, start WINDOWS Internet
Explorer (version 6, 7, or 8).
2. In the address field, type: http://<laser imager’s IP address>
NOTE: If you do not know the IP address, check with your network
administrator or the person who installed the laser imager.
3. Click Go.
The main window for the Web Portal shows the general status, the
number of print jobs queued, the number of jobs waiting for film,
and the film count.
The center panel displays the screens where you view and perform
tasks. Online help is available by selecting Documentation from
the left panel, and the Help icon provides context-sensitive Help for
fields and pages.
The left panel also provides the links to all other screens.
NOTE: If you are using WINDOW Internet Explorer 8, place the
Internet Explorer window into compatibility view. After you
have opened the IE8 window, click the Compatibility View
toolbar button. This will correct some potential viewing issues
with IE 8. If the icon is not on the toolbar, select Compatibility
View from the Tools menu.
To Next Page
Loading...
