CARLO GAVAZZI VariFlex3 RVLF Series User Manual

Motor Controllers AC Variable Frequency Drives Type VariFlex
3
RVLF
Specications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 13/12/2017 207
(2). Click”Com Setup” and enter the user interface of Com Setup, shown as figure 8. In this
user interface, set up 79 virtual serial ports of Com2- Com80 for PC. Com1 is the existing
serial port of PC so you can not set up virtual serial ports. Select one or several serial ports
and click “OK.”
• Host column is filled out the configured IP address of RV-TCPIP.
• TCPPort column is filled out ”10001.”
(4). Click “Port Settings” and enter the interface of Port Setting, shown as figure 10. Select
“Raw Mode” and click “OK.”
(3). Click “Add IP” and enter the interface of IP Service Setup, shown as figure 9:
Figure 8: User interface of Com Setup
Figure 9: Interface of IP Service Setup

CARLO GAVAZZI VariFlex3 RVLF Series Specifications

General

Brand	CARLO GAVAZZI
Model	VariFlex3 RVLF Series
Category	Controller
Language	English