Motor Controllers AC Variable Frequency Drives Type VariFlex
3
RVLF
4.2. Programmable Parameter Groups
Parameter Group No. Description
Group 00 Basic parameters
Group 01 V/F Pattern selections & setup
Group 02 Motor parameters
Group 03 Multi function digital Inputs / Outputs
Group 04 Analog signal Inputs / Analog output
Group 05 Preset frequency selections.
Group 06 Auto run (auto sequencer) function
Group 07 Start/stop command setup
Group 08 Drive and motor protection
Group 09 Communication function setup
Group 10 PID function setup
Group 11 Performance control functions
Group 12 Digital display & monitor functions
Group 13 Inspection & maintenance function
Parameter notes for Parameter Groups
*1 Parameter can be adjusted during running mode
*2 Cannot be modied in communication mode
*3 Does not change with factory reset
*4 Read only
Specications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 13/12/2017 45
To Next Page
Loading...
Need help?
General