Carrier 38APS025 - Temperatures Mode and Sub-Mode Directory; Pressures Mode and Sub-Mode Directory

179
APPENDIX A — DISPLAY TABLES (cont)
Temperatures Mode and Sub-Mode Directory
NOTES:
1. Normal scrolling marquee rotation is Item, Value, and Units; for
example, OAT, 72.5, °F. In case of a fault, the normal rotation is
modified to indicate the fault; for example, OAT, 72.5, °F, FAIL.
2. If Configuration
o
OPT1
o
SPT.S=DSBL, the display will read
0.0 °F (–17.8 °C).
Pressures Mode and Sub-Mode Directory
NOTE: Normal scrolling marquee rotation is Item, Value, and Units;
for example, DP.A, 238.4, PSIG. In case of a fault, the normal rota-
tion is modified to indicate the fault; for example, DP.A, 238.4, PSIG,
FAIL.
SUB-MODE ITEM DISPLAY ITEM DESCRIPTION COMMENT
UNIT
ENTERING AND LEAVING UNIT TEMPERATURES
RAT XXX.X °F (°C) Return Air Temperature See Note 1
SAT XXX.X °F (°C) Supply Air Temperature See Note 1
OAT XXX.X °F (°C) Outside Air Temperature See Note 1
SPT XXX.X °F (°C) Space Temperature See Notes 1 and 2
CIR.A
TEMPERATURES CIRCUIT A
SCT.A XXX.X °F (°C) Saturated Condensing Tmp
SST.A XXX.X °F (°C) Saturated Suction Temp
RGT.A XXX.X °F (°C) Compressor Return Gas Temp See Note 1
D.GAS XXX.X °F (°C) Discharge Gas Temp
SH.A XXX.X ǻF (ǻC) Suction Superheat Temp
CIR.B
TEMPERATURES CIRCUIT B
SCT.B XXX.X °F (°C) Saturated Condensing Tmp
SST.B XXX.X °F (°C) Saturated Suction Temp
RGT.B XXX.X °F (°C) Compressor Return Gas Temp See Note 1
SH.B XXX.X ǻF (ǻC) Suction Superheat Temp
SUB-MODE ITEM DISPLAY ITEM DESCRIPTION COMMENT
PRC.A
PRESSURES CIRCUIT A
DP.A XXX.X psig (kPa) Discharge Pressure See Note
SP.A XXX.X psig (kPa) Suction Pressure See Note
PRC.B
PRESSURES CIRCUIT B
DP.B XXX.X psig (kPa) Discharge Pressure See Note
SP.B XXX.X psig (kPa) Suction Pressure See Note