Carrier AquaForce 30XB series - 30 XB-1550 Module 1;2; 30 XB-1550 Module 2;2

14
3.9 - 30XB-1550 module 1/2
1
1
1
POWER AND CONTROL ELECTRICAL BOX
SPACE REQUIRED BETWEEN MODULE 1
AND MODULE 2 FOR
COILS SERVICE
9574 HT
2253 HT
438
1500
1500
MODULE 2
500
2200
2297 HT
442
3.10 - 30XB-1550 module 2/2
SPACE REQUIRED BETWEEN
MODULE 1 AND MODULE 2 FOR
COILS SERVICE
POWER AND CONTROL ELECTRICAL BOX
500
MODULE 1
1500
1500
4798 HT
2253 HT
439
493
2297 HT
2200
1
1
1
Legend
NOTES:
- Drawings are not contractually binding.
- Before designing an installation, consult the certied
dimensional drawings, available on request.
- For the positioning of the xing points, weight distribution
and centre of gravity coordinates please refer to the
dimensional drawings.
- If the installation includes several units or if this (these)
is (are) close to walls, please refer to chapters 3.12 -
“Multiple chiller installation” and 3.13 - “Distance to the
wall” of this document to determine the space required.
All dimensions are given in mm.
a
Required clearances for maintenance (see note)
b
Recommended space for evaporator tube removal
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certied drawing.
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certied drawing.
Air outlet – do not obstruct
Power supply and control connection
3 - DIMENSIONS, CLEARANCES