BACview®6 Handheld device
BACview® CARRIER CORPORATION ©2021
Installation and User Guide All rights reserved
6
To obtain a controller status report
To obtain a status report (Modstat) for the connected controller, press FN + . (the period key). Use the arrow keys
to scroll through the report.
To handle alarms
If the alarm features are set up, the BACview® device will do the following when it receives an alarm from the
controller:
• Turn on the Alarm LED
• Turn on the audible alarm
• List the alarm in the Active Alarms list on the Alarms screen
When the BACview® device receives the alarm's return-to-normal, it moves the alarm from the Active Alarms list
to the Returned-To-Normal list. The audible alarm and LED turn off after all active alarms have returned to normal.
To manually turn off alarms before the BACview® device receives the return-to-normal, you can:
• Press MUTE to silence the alarm.
• Press FN+MUTE to silence the alarm, turn off the LED, and move all alarms in the Active Alarms list to the
Manually Cleared list.
To adjust the display's brightness
To adjust the contrast of the display, turn the contrast screw on top of the BACview®
6
Handheld device clockwise
to lighten the display or counterclockwise to darken it.
To Next Page
Loading...