Virtual BACview® application
BACview® CARRIER CORPORATION ©2021
Installation and User Guide All rights reserved
11
To obtain a Modstat report
To obtain a Modstat report that shows the status of the connected controller, hold down Ctrl and click . (the period
key). Use the arrow keys to scroll through the report.
To handle alarms
If the alarm features are set up, the Virtual BACview® application does the following when it receives an alarm
from the controller:
• Turn on the Alarm LED
• Turn on the audible alarm
• List the alarm in the Active Alarms list on the Alarms screen
When the Virtual BACview® application receives the alarm's return-to-normal, it moves the alarm from the Active
Alarms list to the Returned-To-Normal list. The audible alarm and LED turn off after all active alarms have
returned to normal.
To manually turn off alarms before the Virtual BACview® application receives the return-to-normal, you can:
• Click MUTE to silence the alarm.
• Hold down Ctrl and click MUTE to silence the alarm, turn off the LED, and move all alarms in the Active
Alarms list to the Manually Cleared list.
To change the number of screen rows
1 Select File > Restart.
2 Type the number of rows in the Row Count field.
To Next Page
Loading...