Carrier BACview - BACview6 Handheld Device Specifications; Device Connectivity and Specs

BACview®6 Handheld device
BACview® CARRIER CORPORATION ©2021
Installation and User Guide All rights reserved
3
Specifications
Power required
+12 Vdc @ 200 mA
Power supply
Supplied by the 4-conductor Rnet cable from the controller.
Backlit LCD display
4-line by 40-character display
Cable
6 ft. (1.8 m) cable to connect to controller's Local Access port.
Protection
15 KV ESD protection to the enclosure. Built-in solid-state polyswitch protection on
incoming power. Polyswitch is not replaceable; it will reset itself if the condition
that caused a fault returns to normal.
Environmental operating
range
32–120°F (0–48.9°C), 10–90% relative humidity, non-condensing
Overall dimensions
Width:
Height:
Depth:
9 5/8 in. (24.5 cm)
4 15/16 in. (12.5 cm)
1 in. (2.5 cm)
Weight
1.2 lbs (0.54 kg)
Listed by
UL-916 (PAZX), cUL-916 (PAZX7), FCC Part 15-Subpart B-Class A, CE
To connect to a controller
Insert the BACview®
6
Handheld's cable connector into the controller's Local Access port connector.