Carrier BACview - Page 29

Setting local schedules
BACview® CARRIER CORPORATION ©2021
Installation and User Guide All rights reserved
25
7 Define the time of each transition during the day from off (unoccupied) to on (occupied) and vice versa:
a) Highlight Add/Del, then press Enter.
b) Use the INCR softkey to change the value to Add, then press Enter.
c) The 12:00 am state is always the first transition. Change the 12:00 am state if it should be On. For help,
see To change a property in a BACview® device (page 5) or To change a property in the Virtual
BACview® application (page 10).
d) Highlight Add/Del, then press Enter.
e) Use the INCR softkey to change the value to Add, then press Enter.
f) Change the time and state of the new transition.
g) Repeat steps d through f until you have added all transitions for the day.
NOTES
○ To delete a transition, highlight Add/Del in that row, press Enter, use the DECR softkey to change the
value to Delete, then press Enter.
○ To create a 24-hour off or on schedule, define only the 12:00 am state.
8 Press the Save softkey.
To set the...
To...
Do the following...
Year
Any year
1. Highlight Select, then press Enter.
2. Use INCR to change the field to Any, then press Enter.
A specific year
1. Highlight 2009, then press Enter.
2. Change the date, then press Enter.
Month
Even, Odd, or Any
1. Highlight Select, then press Enter.
2. Use INCR to change the field to Even, Odd, or Any, then
press Enter.
A specific month
1. Highlight Jan, then press Enter.
2. Use INCR to change the month, then press Enter.
Day
Last or Any
1. Highlight Select, then press Enter.
2. Use INCR to change the field to Last or Any, then press
Enter.
A specific date
1. Highlight 1, then press Enter.
2. Change 1 to the number you want, then press Enter.
DOW
(day of week)
Any
Leave the default.
A specific day
of the week
1. Highlight Any, then press Enter.
2. Use INCR to change the field to Select, then press Enter.
3. Highlight Mon, then press Enter.
4. Use INCR to change the day of the week, then press Enter.
Week
Any
Leave the default.
Last
1. Highlight Any, then press Enter.
2. Use INCR to change the field to Last.
3. Press Enter.
A week number
(Ex: 2nd week
of the month)
1. Highlight Any, then press Enter.
2. Use INCR to change the field to Select, then press Enter.
3. Highlight 1, press Enter, use INCR to change the week
number, then press Enter.